About Me 0087: repair appliance

Your refrigerator is probably your most expensive appliance to purchase, and it can also be your most expensive appliance to own. You refrigerator is about the only appliance that you own that runs non-stop, therefore it is also the biggest consumer of energy that you own. To keep your energy cost down, and to avoid having to replace that expensive appliance, it is essential that you take proper care of your refrigerator.

The most important thing that needs to be done to keep your refrigerator running efficiently - and to simply keep it running - is to take good care of the coils. The coils on your refrigerator are located in the rear of your refrigerator, on the bottom. These coils attract dust, and when they are covered with dust they have to work harder to maintain a cool temperature within the refrigerator. The harder they have to work, the higher your electricity bill will be. Cleaning these coils is quite simple. Simply pull your refrigerator away from the wall and then vacuum the dust off of them.

The next thing that needs to be cleaned is the drip pan of the refrigerator. The drip pan is located beneath the refrigerator, and simply needs to be pulled out, emptied, and cleaned with soapy water. If you have an automatic defrost refrigerator, the water from the defrosting process flows out of a drain in the floor of the refrigerator and into the drip pan. The water remains there until it evaporates. Small particles of food can either flow through a tube to the drip pan or they can get caught in the tube and clog it. To clean the tube, simply stick a pipe cleaner into the tube and flush it with water. Do this before removing the drip pan so that the water is caught. Then, of course, remove the drip pan and clean it.

The gaskets on your refrigerator seal the cold air in the refrigerator, and keep the warm air out. If proper care is taken of the gaskets, they should last the life of the refrigerator. All that is necessary to keep the gaskets in good shape is to wash them down with soapy water from time to time.

Last but not least, if your refrigerator does not have automatic defrost, be sure to not let the frost in your freezer compartment get any deeper than a quarter of an inch.

Monday, July 16, 2012

Some Quick Home Appliance Repair Tips That Will Help You

Repainting is an inexpensive way to modernize a dated appliance or to coordinate the colors of your appliances with your kitchen's color scheme. It is a relatively easy process. Here's how to use appliance paint to give your kitchen or laundry room appliances a new look.

1. Choose the right paint. Be sure to purchase appliance paint especially formulated to paint household appliances such as refrigerators, washing machines, microwaves, and dishwashers. These paints are not for use on or near surfaces that get hot, such as stove tops. For those surfaces, be sure to purchase a heat-resistant paint. Also there are specialty appliance paints for resurfacing the inside of a microwave.

Appliance paint comes in brush-on and spray-on versions. Spray-on paint is best if you are planning to repaint the entire appliance, while brush-on paint is preferable it you are touching up chips or dents.

At the same time you purchase your paint, buy any other equipment you will need such as spray paint applicators, brushes, tarps, masking tape. And don't forget safety equipment, such as gloves, masks and goggles. You can purchase appliance paint at most hardware or home improvement stores.

2. Read the instructions for the appliance paint you've chosen carefully before starting your project.

3. Unplug the appliance and move it to a well-ventilated area. A garage or outdoors is ideal, but if you have to paint the appliance indoors, be sure that it is in an area where you can open windows or doors. Wherever you plan to paint it, there should be plenty of room around the appliance so that you can move freely and easily access all surfaces. Place the appliance on a tarp or on newspaper to protect the floor.

4. Clean all appliance surfaces well with soap and water to remove dirt, grease and dust. If there is any rust on the surface, remove it and treat the area with a rust deterrent product. Be sure the appliance is completely dry before you start to paint.

5. Use masking tape to cover any parts of the appliance that you do not want to paint.

6. If you are using spray paint, apply the paint with a fluid, sweeping motion. You might start with a light mist of paint that barely covers the entire surface, followed by a second, even layer on top of this base. Let the paint dry thoroughly, then apply a second coat if desired.

If your appliance just needs a touch up not an entire facelift you can use appliance paint to cover scratches, chips or worn areas. The process is similar to painting the entire surface. Be sure to clean the area to be painted thoroughly, apply a thin layer of paint, let it dry thoroughly then paint again if necessary.

Sources:

www.wisegeek.com, What is Appliance Paint?

homeimprovement.lovetoknow.com, How to Use Appliance Paint - LoveToKnow HomeImprovement

deved backhum |
http://www. |
href="http://www.appliancerepairdixhillsnewyork.com" target="_blank">
magic chef appliance repair service in california |
target="_blank">
http://www.houstonappliancerepair.com/ |
http://www.appliance-repair-long islandappliancerep...

|
oven, wine cooler, air heater repair in burbank california |
sub zero refrigerator maintenance

About Me 0087

Friday, July 20, 2012

Improve The Look Of Your Home With These Helpful Tips.

Monday, July 16, 2012

Some Quick Home Appliance Repair Tips That Will Help You